Precision Linear Actuators for XY Tables & Stages: TKS: Specifications

¹ The listed values are intended for reference purposes only, and not as an engineering standard of absolute tolerance for a given actuator. Values were derived from testing of characteristic samples of appropriate products, and indicated an expected range of deviation from a theoretical straight line in the indicated plane of carrier motion. Appropriate installation is the single most important factor in reducing such deviation, so good engineering practices such as measurement, mapping, etc. must be employed in applications with stringent straightness/flatness requirements. For more information on how these values were obtained, please read the white paper on this subject.

² Actuator mounted on a flat surface and fully restrained.

³ Ball Screw; not including backlash.

⁴ Heat generated by the motor and drive should be taken into consideration as well as linear velocity and work cycle time. For applications that require operation outside the recommended temperature range, contact the factory.

LARGE FRAME  MOTORS AND SMALLER ACUTATORS:
Cantilevered motors need to be supported, if  sujected to continuous rapid reversing duty and/or under dynamic conditions.